SPECIFICATIONS

is_customized: Yes

WiFi APP Control: WiFi App Real-time Data Monitoring

USB output: 5V 2A

Solar Charge Controller: WiFi Solar Charge Controller 60A

Origin: Mainland China

Model Number: 12V 24V 48V 60A Solar Charge Controller WiFi

Maximum Current: 60A

Is Smart Device: YES

Charge Mode: PWM

Certification: CE,FCC,RoHS

Battery types: ternary lithium battery/lithium iron phosphate battery/Lifepo4/Lead-acid battery

Application: Charger Controller,Voltage Controller,Lighting Controller,Solar System Controller,Solar Working Station

50A/60A Size: 0.8kg-1.2kg

30A/40A Size: 135*170*70mm

10A/20A Size: 115*145*57mm

WiFi APP Control Solar Charge Controller 12V 24V 48V 60A 50A 40A 30A PWM Solar Regulator For LiFePo4 Lead-Acid Lithium Battery

Note: WiFi APP only supports Android phones; Only local networks are supported, not remote networks (WiFi App Monitoring can only be used when the phone is within the vicinity of the controller)

Product Description

1. Adopt industrial-grade main chip.

2. Large screen, LCD display, adjustable charge and discharge parameters.

3. Complete 3-stage PWM charging management.

4. Built-in near-charge protection, short-circuit protection, open-circuit protection, and reverse connection protection，all self-recovery and will not damage the controller.

5.Dual USB ports make charging more flexible.

6. WIFI APP can check and set it at any time.（WIFI APP only supports Android system, not IOS system）

   (WIFI only supports local network, not remote network)

7. Battery temperature detection function (optional).

8.Our controller can be used in ternary lithium battery, lithium iron phosphate and Lead-acid battery

Advice for safe use

1.This charge controller is 12/24/48V auto identified, Make sure your battery has enough voltage for the controller to recognize the battery type before frst installation.

2.The battery cable should be as short as possible to minimize loss, to avoid affecting the judgment of normal voltage

3. This controller is suitable for Lithium Ternary, LiFePo4 and Lead acid battery.

4.The charge regulator is only suitable for regulating solar modules. Never connect another charging source to the charge regulator.

5.The controller will generate heat when it is running, please pay attention to install the controller on a flat, well-ventilated surface.

How to connect our conroller?

1. Connect the battery to the controller. It is recommended to add an air switch between the controller and the battery to protect the controller and the battery. When the controller is connected to the battery, the LCD screen will display the parameters, and then set the battery type.

2. If you need DC output to control the load, set the output control mode first, and then turn on the DC output disconnect switch.

3. Connect the solar panel PV to the controller, if the PV input voltage is at the controller’s

Within the charging working range, the controller will enter the charging state.

4. It is recommended that the controller add an air switch to the battery, solar panel and load to play a protective role.

5. Size :

10/20A: 115*145*57mm

30/40A: 135*170*70mm

50/60A: 155*197*86mm

Product parameters

Introducing the WiFi APP Control Solar Charge Controller, suitable for LiFePO4, Lead-Acid, and Lithium batteries. Features include adjustable charging/discharging currents (10A-60A), maximum PV voltage (12V-48V), USB output, and standby current (<80mA). Operating temperature range is 20°C to +50°C. Adjustable parameters include float voltage (13-15V/26-30V/52-60V), discharge cut-off voltage (9-10.5V/21-24.5V/39-45.4V), and recovery voltage (10.5-11.7V/45.5-50.7V). Dimensions: 115x145x57mm to 155x197x86mm. Works with various battery types.

12V, 24V, and 48V solar charge controller with 10A, 30A, 40A, 50A, or 60A charging capacity. It features a Wi-Fi APP control system, including protection against overcharge, over-discharge, and overheating. Upgrade chip technology ensures reliable performance and efficient charging.

The WiFi APP Control allows you to monitor and adjust the solar charge controller's settings, including equipment lists, parameter settings, floating charge voltage (14.2V), discharge recovery voltage (12.4V), night mode, load current, and discharge cut-off voltage (10V).

Upgrades 3-phase PWM charging for lead-acid, lithium iron phosphate, and lithium batteries.

Features an LCD digital display, LED lights, and easy USB connectivity. The battery load sensor and remote temperature monitoring ensure correct charging and discharging for your solar-powered system.

This WiFi-controlled solar charge controller features various safety protections, including reverse current prevention, short-circuit protection, and overload protection. It also offers battery overcharge, discharge, and overheating protection, as well as surge protection and TVS high-pressure protection.

Control your solar energy system with ease. This WiFi APP control solar charge controller features a simple and stylish design, with fine details and thoughtful touches. Enjoy convenient operation with an LCD display, indicator lights for battery status and load levels, and a menu-driven interface.

Vented, waterproof solar charger controller with dimensions 125 x 197 x 86 mm for charging lead-acid, lithium-ion, and LiFePO4 batteries up to 12V/24V/48V.

Compact size: 155mm x 197mm x 86mm. Easy to install and use.

Solar Charge Controller: Demuda brand, 197mm in length, with dimensions of 155mm x 86mm.

High-quality solar charge controller with efficient design for charging LiFePO4, lead-acid, or lithium batteries.

Features rapid heat dissipation with cooling vents on both sides for efficient temperature management.

Improved heat dissipation for smoother and cooler operation

WiFi-enabled solar charger with six protection functions for safe and efficient charging.

High-performance WiFi APP-controlled solar charger for LiFePO4/Lead-Acid/Lithium batteries with PWM regulation.

EATITT LAITEI DEMUDA FLER Solar Charge Controller for LiFePO4, Lead-Acid and Lithium Batteries.

KDYZ WiFi APP Control Solar Charge Controller: A versatile regulator for LiFePO4, Lead-Acid, and Lithium batteries. It features PWM solar control, adjustable charging current (30A/40A/50A), and compatibility with 12V, 24V, and 48V systems.

Control interface for WiFi APP: Display and set battery parameters, including solar charging current, load discharge power, floating charge voltage, discharge recovery voltage, and discharge cut-off voltage. Additionally, adjust load output control mode and select battery type (LiFePO4, Lead-Acid, or Lithium).

This solar charge controller features an LCD display, USB interface, and battery terminal. It includes a temperature sensor, load switch button, and cooling port. The housing case has a compact design with page up/down buttons for easy navigation.

How to Connect WIFI APP

To control the solar charge controller via WiFi, open your phone's settings and click on the APP icon. Then, add KDY to the WLAN network (password: 12345678). Once connected, you can adjust parameters such as voltage and current using the app.

**Note:** I've corrected the OCR errors and rephrased the text to make it clear, concise, and grammatically correct.

Shipping Time: 3-90 days from China. Please note that delivery times may vary depending on the region and custom clearance.

Excellent product! I'm pleased with its performance, the seller's service, and timely delivery. Please rate 5 stars if you're satisfied - thank you for your support!